PAZON SURE-FIRE Twin Cylinder 12 Volt system

  • $135.00
    Unit price per 

Only 0 left!
Will be in stock after


Stop worrying about hard starting resulting from your electrical system.  A must have for easy running and spot on timing!
The PAZON SURE-FIRE Ignition System is the worry-free solution to keeping your classic bike on the road!

Timing worries?
These are a thing of the past with the SURE-FIRE trigger assembly.
The quality double-sided printed circuit pickup features degree calibration marks for precise timing adjustment.
Your choice of terminal block or solder pad connections.
Precision engineered aluminium rotor with small powerful submerged button magnets - no screws to foul the pickup, as associated with other systems.
Do you view electrics as black magic?
Are your concerned about wiring up the wrong way?
Don't worry, the SURE-FIRE Ignition Module is protected against reverse battery connections (easily done if you are unfamiliar with vehicle wiring).
Have you ever fitted an ignition system where the wires don't reach?
SURE-FIRE has extra long wires from the ignition module - 1metre long, allows the unit to be fitted almost anywhere.
SURE-FIRE does not have the connection problems associated with other systems, the wires run directly from the module to the pickup. All you need is a small screwdriver to make these connections.

Are you worried that the ignition will be bulky and difficult to hide? 
The SURE-FIRE ignition module is compact (80mm x 40mm x 20mm) and light.
Its size & shape makes it easy to fit and hide out of sight

New to electronic ignitions?
Every SURE-FIRE system includes a comprehensive full colour installation booklet to guide you through, with easy-to-read, detailed instructions, photos, wiring diagrams and advance curves.



Triumph/Bsa Twin Cylinder Motorcycles with 12 Volt electrics (positive or negative earth) & points in the side casing, including:

Triumph Bonneville/Tiger/T100/110/120/140/140V/140E
BSA A50/A65
NORTON Commando 750/850 / NORTON Atlas
Enfield Interceptor



Ignition module Black coil link wire
Trigger Assembly Red Grounding Wire
Magnetic Rotor Crimp Connectors & Insulators
1/4" BSF Bolt Large & Small Cable ties
1/4" UNF Bolt 1/4" Flat Washer

Note: Always use copper cored HT leads, do not use carbon-fibre leads. NGK resistor type plug caps recommended, but non-resistor will work.

Recommended ignition coils:

2 x IC26 6 volt Lucas single output coil (Lucas 17P6/17M6 type)

1 x IC35 12 volt dual output coil (5 Ohm primary)

1 x IC33 12 volt dual output coil (3 Ohm primary)

We Also Recommend